UnoTech GmbH 120 V5

Technical data baler: Manufacturer unoTech GmbH, Niederlangen, Germany Typ 120 V5 Year of construction 2009 Press force main press 100 tons Specific press force 145 N/m² Max. cutting force 120 tons Press force free stamper 25 tons Feed channel 2,000 x 1,020 mm (l x w) Capacity per cycle time 1,5 m³ Theoretic throughput rate 650 m³/hour Bale size 1,100 x 750 mm (w x h) Driving motor 2 x 75 kW Connected load 160 kW Rated current 280 A Tying system 5-fold vertical, fully automatic Throughput rate at a bulk weight of 20 to 30 kg/cbm up to 15 tons/hour bulk weight of 35 to 50 kg/cbm up to 23 tons/hour bulk weight of 60 kg/cbm up to 27 tons/hour bulk weight of 100 kg/cbm up to 44 tons/hour Bale weight 600 up to 900 kg, depends on material SPS controller (manuf., type) Siemens S7 300 Operating panel (manuf., type) Siemens SIMATIC Baler dimensions built up with hopper 20,000 x 23,000 x 6,190 mm (l x w x h) Transport dimensions only baler 13.630 x 2.350 x 3.130 mm (l x w x h) Machine weight baler approx. 37 tons Accessories 4 wire stations for a total of 10 pieces 500 kg wire coils (wire not included in the sales volume) Condition of the baler: The baler was operated almost exclusively with paper and cardboard, therefore the low wear and tear. The machine has been serviced regularly and is in a really good condition, ready for operation and need not fear any comparison. Uncompromising quality from Germany with unique technical refinements distinguish this baler "made by unoTech". Comments: The documentation (Manual, CE, electr./hydr.-drawings), are completely available. An inspection during operation is possible by appointment. We will not assume liability for the given technical data and possible errors. Technical data conveyor belt: Manufacturer unoTech Typ KTH 1700 Year of construction 2009 Driving motor 5,5 kW Length feeding conveyor 6,000 mm Length elevating conveyor 10,233 mm Length goose neck 1,500 mm Grade 30° Effecting width 1,625 mm Height of side wall feeding conv. 500 mm Height of side wall elevating conv. 1,000 mm Transport dimensions over all Feeding conveyor 7,000 x 2,200 x 1,200 mm (l x w x h) Elevating conveyor 13,600 x 2,200 x 1,500 mm (l x w x h) Pit dimensions (Conveyor belt) 10,650 x 2,125 / 3,640 mm x 1,200 mm ( l x w x h) Condition of the conveyor belt: The running rails, chains and the rubber belt are in a good and immediately operational condition.